Inconel Alloy Fasteners: High-Temperature & Corrosion-Resistant Engineering Bolting
Neelkamal Alloys LLP is an ISO certified manufacturer, stockist, and global exporter of high-grade Inconel fasteners based in Mumbai, India. Specialized in high-nickel superalloy metallurgy, we produce precision-machined Inconel 600, Inconel 601, Inconel 625, Inconel 718, and Incoloy 800/825 hex bolts, heavy hex nuts, stud bolts, socket cap screws, washers, and threaded rods.
Engineered to perform in environments where standard stainless steel grades experience rapid oxidation or stress corrosion cracking, Inconel nickel-chromium alloys retain superior mechanical strength and oxidation resistance at temperatures ranging from cryogenic conditions up to 1800°F (982°C).
Key Metallurgy & Material Advantages of Inconel Fasteners:
- Extreme Temperature Stability: High tensile and yield strength in heat treatment facilities, gas turbine engines, and exhaust systems.
- Chloride Stress Corrosion Resistance: Virtually immune to chloride-ion stress-corrosion cracking in marine, offshore oil platform, and seawater desalination plants.
- Severe Acid & Chemical Protection: Excellent resistance to organic and inorganic acids including nitric, hydrochloric, hydrofluoric, and phosphoric acid service.
- Creep & Rupture Strength: Precipitation hardenable grades like Inconel 718 (UNS N07718 / ASTM B637) deliver exceptional fatigue life under intense pressure.
Manufacturing Range & Standards Compliance
Every batch of Inconel fasteners manufactured by Neelkamal Alloys LLP is subjected to full heat-number traceability, chemical spectral analysis (PMI), mechanical testing, and dimensional inspection in strict adherence to international standards including ASTM B637, ASTM B574, ASTM B446, ASTM B166, ASME B18.2.1, ASME B18.2.2, DIN 931, DIN 933, and DIN 912.
Inconel Bolting Technical Specifications Guide
| Parameter | Specification & Manufacturing Range |
|---|---|
| Available Alloy Grades | Inconel 600 (UNS N06600), Inconel 601 (UNS N06601), Inconel 625 (UNS N06625 / 2.4856), Inconel 718 (UNS N07718), Incoloy 800 (UNS N08800), Incoloy 825 (UNS N08825) |
| Fastener Types | Hex Head Bolts, Heavy Hex Bolts, Double-End Stud Bolts, All-Thread Studs, Socket Head Cap Screws, Hex Thin Nuts, Lock Nuts, Flat Washers, Spring Washers, Threaded Rods, Custom Drawing Components |
| Size Dimensions | Metric: M2 to M100 | Imperial: 1/4" to 4" custom lengths up to 3000mm |
| Standard Specifications | ASTM B637, ASTM B574, ASTM B446, ASTM B166, ASME B18.2.1, ASME B18.2.2, DIN 931, DIN 933, ISO 4014 |
| Surface Coatings | Plain Bright, PTFE / Xylan Fluoropolymer Coated, Hot-Dip Galvanized, Cadmium Plated, Zinc-Nickel Coating |
| Quality Certification | EN 10204 3.1 Mill Test Certificate, PMI Test Report, Microstructure Analysis, NDT / Ultrasonic Inspection Report |
Chemical Composition & Mechanical Performance
Below are the chemical element limits and mechanical performance figures for major export-grade Inconel alloys used in critical pressure boundary bolting:
Chemical Composition Breakdown
| Grade | Ni (Nickel) | Cr (Chromium) | Fe (Iron) | Mo (Molybdenum) | Nb + Ta |
|---|---|---|---|---|---|
| Inconel 600 | 72.0% min | 14.0 - 17.0% | 6.0 - 10.0% | - | - |
| Inconel 601 | 58.0 - 63.0% | 21.0 - 25.0% | Balance | - | - |
| Inconel 625 | 58.0% min | 20.0 - 23.0% | 5.0% max | 8.0 - 10.0% | 3.15 - 4.15% |
| Inconel 718 | 50.0 - 55.0% | 17.0 - 21.0% | Balance | 2.8 - 3.3% | 4.75 - 5.50% |
Mechanical Properties Reference
| Alloy Grade | Density (g/cm³) | Melting Point | Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation (%) |
|---|---|---|---|---|---|
| Inconel 600 | 8.47 | 1413 °C (2580 °F) | 655 MPa | 310 MPa | 40 % |
| Inconel 601 | 8.11 | 1411 °C (2571 °F) | 550 MPa | 205 MPa | 30 % |
| Inconel 625 | 8.44 | 1350 °C (2460 °F) | 930 MPa | 517 MPa | 42.5 % |
| Inconel 718 | 8.19 | 1336 °C (2437 °F) | 1240 MPa | 1034 MPa | 15 % |
Quality Assurance & Export Verification (E-E-A-T Guarantee)
At Neelkamal Alloys LLP, material integrity is guaranteed from raw bar selection to final seaworthy export packing. All orders receive comprehensive quality inspection including:
- Positive Material Identification (PMI): Non-destructive XRF spectro testing to confirm chemical grade signature on every bolt.
- Dimensional Thread Verification: Pitch diameter and thread tolerances checked using certified GO / NO-GO ring and plug gauges.
- Mechanical Testing: Tensile, proof load, elongation, and Rockwell / Brinell hardness testing per ASTM guidelines.
- Third-Party Inspection: Customer-designated independent inspection agencies (TUV, Bureau Veritas, SGS, DNV) welcomed upon request.
Frequently Asked Questions by Overseas Buyers
Q: What is the main operational difference between Inconel 625 and Inconel 718 bolting?
A: Inconel 625 relies on solid-solution strengthening with Molybdenum and Niobium for high corrosion resistance and thermal stability up to 1800°F. Inconel 718 is a precipitation-hardenable superalloy designed for extreme mechanical strength, providing higher tensile and creep-rupture performance up to 1300°F.
Q: Do your export shipments include EN 10204 3.1 Mill Test Certification?
A: Yes. All global export shipments are delivered with authentic EN 10204 3.1 Mill Test Certificates detailing melt heat numbers, chemical analysis, mechanical property test data, and heat treatment cycles.
Q: Can you manufacture custom drawing-based Inconel fasteners with special coatings?
A: Yes. We precision-machine custom Inconel components according to engineer drawings, including special thread pitches, non-standard lengths, step studs, and PTFE / Xylan anti-galling coatings.
Need Pricing or Technical Datasheets for Inconel Fasteners?
Our sales engineering team provides rapid response within 24 hours with certified technical specs, lead times, and competitive global FOB/CIF quotation.
Get a Quote